INTEGRA Biosciences VacuSafe Bedienungsanleitung Seite 22

Setting pressure and hysteresis
Switch on the pump with the power switch. The
●
actual pressure in the bottle will be displayed.
Press the MODE key until the LED
●
PRESSURE lights.
Press the SELECT key. The LED "∆P"
●
will light and the actual hysteresis value
will be displayed.
Set the required hysteresis value using the
●
keys.
Press the SELECT key. The LED "P"
●
will light and the actual value of the
pressure will be displayed.
Set the required pressure value using the
●
keys.
Example: P= 200
●
Press the SELECT key. The LEDs will
●
extinguish indicating that VacuSafe is
ready for operation. The actual pressure
in the bottle will be displayed.
22
and
and
∆P = 50