Seite 1
LSA-3400 / LSA-4000 SWITCHING POWER AMPLIFIER stage-sound - ENGLISH - ENGLISH OPERATING INSTRUCTIONS / BEDIENUNGSANLEITUNG OPERATING INSTRUCTIONS / BEDIENUNGSANLEITUNG - DEUTSCH - DEUTSCH...
Seite 2
Produkt auch richtig verwenden. Electromagnetic compatibility and low-voltage guidelines: RCS leaves all devices and products, which are subject to the CE guidelines by certified test laboratories test. By the fact it is guaranteed that you may sell our devices in Germany and in the European Union domestic market without additional checks.
Bitte überprüfen Sie das Gerät sofort auf evtl. Transportschä- during transport. Each RCS product is carefully inspected den. Jedes RCS Produkt wird vor dem Verpacken sorgfältig at the factory and packed in a special carton for safe überprüft und in einem speziell dafür vorgesehenen Karton transport.
LED remains lit, do not use the amplifier. Re- ker aus, beheben Sie den Fehler und starten Sie das Ge- fer the device to the RCS service facility or contact your rät erneut. Sollte die Protect LED immer noch leuchten, dealer for help.
SWITCHING POWER AMPLIFIER stage-sound 5. Parallel Mode Indicator LED 5. Parallel-Modus LED-Anzeige Lights when channels A& B are in the parallel mode. Leuchtet, wenn die Kanäle A & B in Parallel-Betrieb sind. 6. Signal Indicator LED 6. Signal LED-Anzeige 7. Input Level Attenuators 7.
SWITCHING POWER AMPLIFIER stage-sound MOUNTING AUFSTELLUNG The LSA-3400/LSA-4000 is designed for standard 19” rack Der LSA-3400/4000 wurde für den Einbau in 19”-Racks mounting. In addition, the amplifier is provided with sturdy entworfen. Um auch als Tischgerät oder zur Stapelung ver- no-skid rubber feet for secure tabletop or stacked operation.
Eingängen empfangenen Signal, am Lautsprecher-Aus- ved at the inputs. The LSA-3400/LSA-4000 has two channels gang ein eigenständiges, getrenntes Signal zur Verfügung. for stereo operation. Follow these steps to use the amplifier Der LSA-3400/LSA-4000 hat zwei Kanäle für den Stereo-Be-...
SWITCHING POWER AMPLIFIER stage-sound PARALLEL OPERATION PARALLEL-BETRIEB This method of operation parallels the amplifier´s outputs Diese Betriebsart schaltet die Ausgänge des Verstärkers pa- and can be used with 4 ohms or higher applications only. rallel und kann nur für Anwendungen mit 4 Ohm oder mehr Follow these steps to use the amplifier in this manner: verwendet werden.
SWITCHING POWER AMPLIFIER stage-sound SPECIFICATIONS TECHNISCHE DATEN LSA-3400 LSA-4000 Output Power (1 kHz, 1% THD) 2 ohms 2 x 1700 W 2 x 2000 W 4 ohms 2 x 1300 W 2 x 1700 W 8 ohms 2 x 900 W 2 x 1250 W Output Power (1 kHz, 0.1% THD)