Herunterladen Inhalt Inhalt Diese Seite drucken

Werbung

BA-120/240/480 CP

Werbung

Inhaltsverzeichnis
loading

Inhaltszusammenfassung für RCS BA-120

  • Seite 1 BA-120/240/480 CP...
  • Seite 2: Safety Instructions

    BA-120/240/480 CP SAFETY INSTRUCTIONS SICHERHEITSHINWEISE Read all safety instruction before operating. Vor Inbetriebnahme des Verstärkers bitten wir sie, die Sicher- heitshinweise aufmerksam zu lesen. 1. Install equipment as follow condition: Install at flat place, not bending curved. 1. Installation nach folgenden Richtlinien: Do not install near the water and moisture.
  • Seite 3 BA-120/240/480 CP MOUNTING MONTAGE Amplifier racking size BA series are designed for standard Die Verstärker sind mit seitlichen Befestigungswinkeln für den 19" rack mounting. Please pay close attention to the cooling Einbau in 19" Gestelle versehen. Zusätzlich empfiehlt sich die requirements.
  • Seite 4: Front Panel Controls

    BA-120/240/480 CP FRONT PANEL CONTROLS VORDERSEITE 1. POWER SWITCH 1. EIN- /AUSSCHALTER Power this switch "ON" will make the power and supply the Nach Betätigen dieses Schalters ist das Gerät betriebs- power. bereit. 2. LED INDICATORS 2. LED`s • TEMPERATURE (RED COLOR).
  • Seite 5: Rear Panel Controls

    BA-120/240/480 CP REAR PANEL CONTROLS RÜCKSEITE 1. PROGRAM AUDIO INPUT TERMINAL 1. PROGRAMM EINGANG Audio input terminal of Program signal (for normal announ- Symmetrischer Audio Eingang (INPUT) für Programm- und cment) with screw terminal. Signaleinspeisung, wobei durch die Phönix-Stecker der Input level is +4dBu (1,23 V) 30 kΩ...
  • Seite 6 BA-120/240/480 CP • For JRG-220 A • Priorität durch Relaisfeld JRG-220 A Connect terminal of AMP PRIORITY CONTROL OUT of Mit dieser Schaltung wird die Priorität vom Relaisfeld JRG- JRG-220 A. 220 A ausgelöst. 6. MONITOR TERMINAL 6. MONITOR AUSGANG This terminal should be connected with MU-307 A or Dieser Klemmanschluß...
  • Seite 7 BA-120/240/480 CP...
  • Seite 8: Block Diagram

    BA-120/240/480 CP BLOCK DIAGRAM...
  • Seite 9 BA-120/240/480 CP SPECIFICATIONS TECHNICAL Input sensitivity / impedance (PGM, PRIORITY) +4dBu(1.23V)/30KΩ BALANCED Rated Output BA-120CP : 120W(RMS) BA-240CP : 240W(RMS) BA-480CP : 480W(RMS) Output Impedance BA-120CP : (5.2Ω)25V, (8Ω)31V, (41Ω)70V, (83Ω)100V BA-240CP : (2.6Ω)25V, (8Ω)44V, (20Ω)70V, (42Ω)100V BA-480CP : (8Ω)62V, (10Ω)70V, (21Ω)100V...
  • Seite 10 BA-120/240/480 CP NOTE :...
  • Seite 11 BA-120/240/480 CP NOTE:...
  • Seite 12 BA-120/240/480 CP Electromagnetic compatibility and low-voltage guidelines: RCS leaves all devices and products, which are subject to the CE guidelines by certified test laboratories test. By the fact it is guaranteed that you may sell our devices in Germany and in the European Union domestic market without additional checks.

Diese Anleitung auch für:

Ba-240Ba-480 cp

Inhaltsverzeichnis