MC Crypt ME-100 Bedienungsanleitung Seite 37

Connection and Control Elements
(12) SCRATCH TAP button
• Press the SCRATCH button to switch the scratch function on or off through the jog wheel (19).
• Press the buttons SHIFT (20) + TAP in the rhythm of the music to manually determine the BPM value (Beats per
Minute) of the audio track.
(13) PFL button
• Press this button to preview the respective channel ion the headphones.
The selected channel is only played back on the headphones for previewing. The volume can be set
with the HEADPHONE (2) control.
(14) SYNC button
• Press this button to synchronise the beat (BPM value) of the respective channel with the beat of another channel.
(15) KEY button
• Press this button to switch the key function on or off.
• When this function is active, the pitch will not be changed when the playback speed is changed using the
PITCH (16) control.
The device stores the pitch at the time the KEY button is pressed. That means that if the PITCH (18)
control is not in the centre position at this time, the pitch stored is not the original pitch of the track, but
the pitch resulting from the change of playback speed.
(16) CH1 and CH2 channel fader
• Use these sliders to set the volume for the respective channel.
(17) Crossfader
• Control for crossfading between the two channels.
• One channel is faded out using the slide control while the other channel is faded in.
• When the CROSSFADER is in centre position, both channels are played equally.
37