Connection and Control Elements
(1) MASTER control
•
Use this control to set the volume fort he master output (audio output of the computer).
(2) HEADPHONE control
•
Now set the desired volume for the headphone output HEADPHONE (21) with this control.
(3) TRACK selection switch
•
Turn this selection switch to select folders or audio tracks in the software browser window.
•
Press this selection switch to confirm your selection.
(4) GAIN and HI/MID/LO controls
•
GAIN controls the audio signal input level.
•
HI controls the high frequency range.
•
MID controls the middle frequency range.
•
LO controls the low frequency range.
(5) LOAD A BACK / LOAD B button
•
Press the respective button to load a selected audio track from the software browser window to
deck A or deck B.
•
Press the SHIFT (20) + BACK buttons to skip back a level in the browser window's folder hierarchy.
(6) Button
•
Press this button to start playback.
•
Press the button again to interrupt playback.
(7) CUE/PLAY button
•
Press this button during playback to return to the last stored CUE point.
•
When this button is pressed while playback is paused, the current point is stored as a CUE point.
•
Hold the button to start playback from the CUE point.
The CUE point is indicated as a white bar in the software's progress bar.
35