Product Features; Inserting/Replacing The Battery - Bosch DLE 40 Professional Originalbetriebsanleitung

OBJ_BUCH-724-001.book Page 17 Tuesday, July 29, 2008 1:25 PM

Product Features

The numbering of the product features shown
refers to the illustration of the measuring tool
on the graphic page.
1 Button for reference level of the front
measuring-tool edge
2 Memory retrieve button "M="
3 Memory add button "M+"
4 Area measurement button
5 Length measurement button
6 Display
7 Alignment aid
8 Laser warning label
9 Button for measuring and continuous
measuring
10 Volume measurement button
11 Memory subtraction button "M – "
12 Button for reference level of the rear
measuring-tool edge
13 On/Off and memory delete button
14 1/4" thread
15 Latch of battery lid
16 Battery lid
17 Serial number
18 Laser beam outlet
19 Reception lens
20 Tripod*
21 Laser viewing glasses*
22 Laser target plate*
23 Carrying strap*
24 Protective case
*The accessories illustrated or described are not
included as standard delivery.
Bosch Power Tools
Display Elements
a Battery indication
b Temperature indicator
c Measured value/result
d Unit of measure
e Measurement reference level
f Laser switched on
g Individual measured value (for length
measurement: result)
h Measuring functions
Length measurement
Tracking (continuous measurement)
Area measurement
Volume measurement
i Measured values stored
Assembly

Inserting/Replacing the Battery

Use only alkali-manganese or rechargeable
batteries.
Fewer measurements are possible when using
1.2 V rechargeable batteries as compared with
1.5 V batteries.
To open the battery lid 16, press the latch 15 in
the direction of the arrow and remove the bat-
tery lid. Insert the batteries provided. Pay atten-
tion to the correct polarity of the batteries
according to the representation in the battery
compartment.
When the battery symbol appears in the dis-
play for the first time, then at least 100 measure-
ments are still possible. The batteries must be
replaced when the battery symbol flashes;
taking measurements is no longer possible.
Always replace all batteries at the same time.
Only use batteries from one brand and with the
identical capacity.
Remove the batteries from the measuring
tool when not using it for extended periods.
When storing for extended periods, the bat-
teries can corrode and discharge themselves.
2 609 140 582 | (29.7.08)
English | 17