Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Stacking kit for washing machines and tumble dryers
The creation of the stacking kit and in order to save space is available for all
the front-loading washing machines which are 60 cm wide and have a
depth which goes from 55 to 60 cm.
Procedure:
Turn the tumble dryer on the right side making sure not to damage the
G
cabinet
Remove the front feet (fig. 1) and substitute them with the relative rubber
G
feet (fig. 1a).
WT1
Fig 1
Place the tumble dryer on the top of the washing machine and unscrew
G
the 2 screw, on the right and left side on the back of the tumble dryer.
Place the relative metal fixing plates (fig. 2b/3b) and fix them with the
G
included screws (A+B) both on the tumble dryer and on the upper
corners.
B
WT2
Fig 2
Small metal fixing plate
A
Screws A = self-tapping screws 4,2 x 13
Screws B = screw positioning
WT18
Fig 1a
B
WT3
Fig 3
Large metal fixing plate
2
A
Werbung
