2.3 Technical data
Universal motor, radio and TV interference suppressed
Input power continuous operation
Milling depth adjustment with fine adjustment
Revolving depth control turret
Tool fastening:
with collets
or with adapter for router bit
Idling speed
Connection diameter at extraction hood
Weight without mains cable
2.4 Noise emission specifications
Noise emission values determined according to EN 60745-1 and EN 60745-2-17:
Idling
Machining
The noise measurement was recorded using the saw blade included in the standard equipment.
The values stated do not take into consideration any possible series variances and are not suitable for
determining the rating levels, as these fluctuate in dependence on the time in service, the respective type of
machining and the environmental influences. The noise rating level can therefore only be determined on an
individual basis at the machine user's position.
2.5 Vibration specifications
The typical hand-arm vibration is 3.3 m/s
2.6 Scope of supply
Router LO 65 Ec MaxiMax
Item No. 916901, 916920, 916921, 916922
1 parallel guide fence
1 template guide Ø 30 mm
1 collet Ø 8 mm (Ø 1/2" - GB)
1 adapter for router bit M 12 x 1
1 extraction hood
1 operating tool
1 operating manual
1 folder "Safety Instructions"
Sound power level
99 dB (A)
106 dB (A)
.
2
230 V~, 50 Hz
2600 W
0 - 65 mm (0- 17/16 in.)
3-stage
Ø 6 – 12 mm and Ø 1/2"
M 12 x 1 (M 10)
10000 - 22000 rpm
35 mm (1 3/8 in.)
6,9 kg (15.2 lbs)
Workplace-related emission value
88 dB (A)
95 dB (A)
LO 65 Ec MidiMAX
(specially suited for template milling)
Item-No. 916950, 916951, 916955
1 template guide Ø 30 mm
1 adapter for router bit M 12 x 1
1 extraction hood
1 operating tool
1 operating manual
1 folder "Safety Instructions"
-16-