Cleaning - Silvercrest IAN 60494 Bedienungs- Und Sicherheitshinweise

Setting-up operation / Cleaning
Prob-
No indicator light
lem
on remote control
when pressing "ON"
or "OFF"
Rem- · Check if the batteries are
edy inserted correctly.
· Check if the batteries have
proper contact with the
springs, if necessary
adjust.
Prob- No reaction from
lem consumer
· Check that the appliance
Rem-
edy is switched on.
· Assign new code to the
remote control socket (see
„preparing the remote
control socket", point 3).
· Check - by walking closer
to it - that the range is
correct for the desired
location.
26 GB
60494_silv_Funksteckdosen-Set_Content_FR.indd 26
Prob- Range is too small
1
lem
Rem- · For large ranges, ensure
edy
· If the range is too small

Cleaning

Q
J
Ensure that no liquids get into the
inside of the device. Use a soft cloth
to clean the housing. Never use
petroleum, solvents or cleaners
which corrode plastics.
j
Before cleaning, always disconnect
the radio-controlled socket from the
wall socket and remove all power
plugs from the device.
that as few walls and as
little furniture as possible
are in the way of the
remote control and the
radio-controlled socket.
at times, the reason could
be a remote control which
works on a similar fre-
quency. Whenever this re-
mote control is active, the
range declines (e.g. wire-
less headphones, radio-
controlled movement
alarms, radio gongs
etc.).
01.04.14 11:59