Battery Charging - Albrecht Tectalk Action Pro Bedienungsanleitung

5. Battery charging

To charge your radios, carefully follow these instructions.
1) Charger Installation
Connect the power adaptor to the mains power supply and connect the adaptor
power plug to the charger cradle. When the battery is being charged the red LED
lights up.
2) Radio Cradling & Charging
Remove all radio accessories and insert your radios in the charging compartment
until you hear a locking sound. The red LED will light up and the radio will be
charged.
3) Charging Completed
The battery charging time is typically 5 hours. When the battery is fully charged
the green LED will be turned on.
4.) Please switch the radio off during charging. However it is possible to keep the
radio on for receiving and standby mode during charging, but please take the
radio out of the stand charger for transmitting! There may be the risk of
interferences if you should transmit during charging.
Adapter Power Plug
Power Adapter
Input: 100-240VAC 50Hz
Output: 9V 500mA
Charging Cradle
LED
7