Basic Radio Operation - Albrecht Tectalk Action Pro Bedienungsanleitung

8. Basic Radio Operation

The PMR446 service which this radio uses shares channels on a 'take turns'
basis. This means only one user is able to speak at a time.
To communicate with other PMR446 radios, all units must be switched to the
same channel (8 choices) and privacy code (38 choices). If the combination you
have selected is already in use please make an alternative selection.
1) Switch on your radio by pressing the Power button for 2 seconds.
2) Check and if necessary change the channel and privacy code settings
(see 9. Function Mode and 10. Radio Features Explained).
3) To speak, hold the radio upright, about 10cm from your mouth and press
the PTT. Speak slowly and clearly towards the radio. Release the PTT
when you have finished speaking. You will hear messages from other
radios within range, with the same channel and privacy code settings.
The appropriate icon will appear in the radio display when you receive or transmit
a message.
11