Burner Description Packaging - elco klockner EK02B.12 Betriebsanleitung

General information
Burner description
Packaging
Burner description
EK02B.12, EK02B.16 and EK02B.21
monobloc fuel-oil burner are blast air
units with one or two stages. They use
fuel-oil with a viscosity of between 1.6
and 6 mm²/s at 20°C (cSt) and a heating
capacity (H ) of 11,86 kWh/kg.
i
The EK02B.12, EK02B.16 and
EK02B.21 are 1-nozzle burners :
– with 1 pressure setting on the
pump (one-stage burner).
– with 2 pressure setting on the
pump (two-stage burner).
4
They can be used on generators
conforming to EN standard 303.1.
They are available in two fixed
combustion head lengths (T1 - T2).
The control and safety unit is designed
for intermittent service (limited to
twenty-four hours of continual operation).
01/2005 - Art. Nr. 13 017 870A
Packaging
The burner with its cover is supplied in
a package weighing about 25 kg which
contains:
the assembly accessories kit :
–
– two flexible lines 1.00m long
(one-stage burner),
or 1.15m long (two-stage burner)
with mounted connectors,
– the connecting flange,
– boiler front gasket,
– bag of nuts and bolts
the document folder containing :
–
– the operating instructions,
– the wiring and hydraulic diagram,
– the certificate of guarantee.
Air flap control
Y10 Servomotor (2-stage)
103B Manual (1-stage)
A1 Control and safety unit
A4 Removable cover
B3 Photocell
M1 Fan motor and pump
T1 Firing transformer
5 Casing (volute casing upwards)
6 Plate securing device
7 Identification plate
8 Blast tube
9 Hose fastening screw
Elec. connection to the boiler
10 7 poles (1 and 2-stage(s))
10.1 4 poles (2-stage controller thermostat)
18 Burner cover
19 Button (fault light indicator) reset
or shutdown of the box
102 Fuel-oil pump with
st
Y1 1 stage solenoid valve on pump
d
Y5 2 stage solenoid valve on pump
113 Air box