While In Use; Symbols; Instructions; Maintenance - PCE Instruments F 65 Bedienungsanleitung

1.1.2. While in use

•
Never exceed the maximum safe values indicated in
the specifications for each type of measurement.
•
When the clamp-on meter is connected to the
measuring circuits, do not touch any unused
terminal.
•
Before changing functions, disconnect the
measuring cords from the circuit being measured.
•
Never perform resistance measurements on a live
circuit.

1.1.3. Symbols

Refer to the operating manual
Se reporter à la notice de fonctionnement
Risk of electric shock
Risque de choc électrique
Double insulation
Isolation double

1.1.4. Instructions

- Before opening the instrument,
you must disconnect it from the measuring circuits
and check that you are not charged with static
electricity, which could destroy internal components.
- A "qualified person" is someone familiar with the
installation, construction, use, and hazards. He/she
is authorized to start up and shut down the
installation and equipment, in conformity with the
safety rules.

1.1.5. Maintenance

Clean the instrument with a damp cloth and soap. Do not
use abrasive substances or solvents.
20
English
F 62