Installation Steps; Package Contents - Axis Communications AXIS 210 Installationsanleitung

AXIS 210/210A/211/211A Installation Guide
AXIS 210/210A/211/211A
This installation guide provides instructions for installing the AXIS 210/210A/211/211A
Network Camera on your network. For all other aspects of using the product, please see the
User's Manual, available on the CD included in this package, or from www.axis.com/techsup

Installation steps

1. Check the package contents against the list below.
2. Hardware overview. See page 4.
3. Install the hardware. See page 6.
4. Set an IP address. See page 7.
5. Set the password. See page 10.
6. Adjust the focus. See page 11.
7. Change the camera's web interface language
(optional). See page 12.

Package contents

Item
Network camera
PS-K indoor power supply
(country specific)
Camera stand
Terminal block connector
CD
Printed Materials
Installation Guide
Models/variants/notes
• AXIS 210
• AXIS 210A: PoE, two-way audio and built-in microphone
• AXIS 211: PoE, Varifocal DC-iris lens
• AXIS 211A: PoE, two-way audio and built-in microphone, Varifocal DC-iris
lens
Europe, UK, Australia, USA/Japan, Argentina, Korea
Supplied with mounting screws
4-pin connector block for connecting external devices to the I/O terminal con-
nector
Axis Network Video Product CD, including installation tools a nd other soft-
ware, product documentation
AXIS 210/210A/211/211A Installation Guide (this document)
Axis Warranty Document
Important!
This product must be used in
compliance with local laws
and regulations.
Page 3