Connection Diagram; Led Indicators - Axis Communications AXIS 210 Installationsanleitung

Page 16

Connection diagram

3.3V

LED indicators

LED Color
Network Green
Amber
Unlit
Status Green
Amber
Red
Power Green
Amber
Switch
Mode
Power
Supply
GND
Indication
Steady for connection to a 100 Mbit/s network. Flashes for network activity.
Steady for connection to 10 Mbit/s network. Flashes for network activity.
No network connection.
Steady green for normal operation.
Note: The Status LED can be configured to be unlit during normal operation, or to
flash only when the camera is accessed. To configure, go to Setup > System Options
> LED settings. See the online help files for more information.
Steady during startup, during reset to factory default or when restoring settings.
Slow flash for failed upgrade.
Normal operation.
Flashes green/amber during firmware upgrade.
AXIS 210/210A/211/211A Installation Guide
+
PS-K 9W
2
e.g., doorbell
1
3
4
+
-
Relay
Device