Cleaning And Maintenance - ROWENTA Silence Force Cyclonic Bedienungsanleitung

751271_SF Cyclonic_16L_751271 08/12/10 11:23 Page14
2 • Plugging in the power cord
and using the vacuum cleaner
Unwind the power cord completely, plug in your
vacuum cleaner and press the ON/OFF button
(fig.10)
.
• Adjust the vacuuming power using the power
switch on the power nozzle
• Position (MIN) for vacuuming delicate fabrics
(net curtains, textiles).
• Position (Medium) for every day vacuuming of
all types of floors, that are only slightly dirty.
• Position (MAX) for vacuuming hard floors and
rugs and carpets that are really dirty.
IMPORTANT
cleaner without the filtration system fitted (3 and 5).
IMPORTANT
once the maximum level is reached I the dust
container.

CLEANING AND MAINTENANCE

The air we breathe contains particles that may be
allergens: mite larvae and droppings, mould, pollen,
smoke and animal residues (hair, skin, saliva, urine).
The smallest particles penetrate deep into the
respiratory system where they can cause
inflammation and cause lung impairment.
HEPA filters (High Efficiency Particulate Air) are used
to filter out the smallest particles.
With the HEPA filter, the air released back into the
room is healthier than the air that is vacuumed.
IMPORTANT
your vacuum cleaner before cleaning or
servicing.
1 • If you have the mechanical
model*: mechanical cleaning
of the HEPA filter
and emptying of the dust
container
Each time after use, we recommend that you
clean the HEPA filter to maintain optimum suction
power.
*Depending on model:
this is either equipment specific to certain models or available as an optional accessory.
(fig.11)
:
Do not operate your vacuum
Do not use the vacuum cleaner
Always switch off and unplug
3 • Storage and transport of
the appliance
After use, switch off your vacuum cleaner by
pressing the ON/OFF button and unplug it
(fig.12)
. Rewind the power cord by pressing the
power cord rewind button
Use the carrying power nozzle to carry your
vacuum cleaner easily
IMPORTANT
Do not use the power nozzle
of the dust container to carry the appliance
(fig.15)
.
When storing your vacuum cleaner, you can park
it either vertically or horizontally
the tube in the storage slot underneath or at the
back of the appliance, in the parking position
(fig.17)
.
The HEPA filter is cleaned using the cleaning knob (6).
After use, switch off your vacuum cleaner, unplug it
and open the cover by pressing the "OPEN" button
(fig.18)
, remove the bowl
HEPA filter cleaning knob by turning it in a
(fig.20)
clockwise direction
filter assembly (3 and 5)
gently against the side of the bowl to remove any
(fig.23)
excess dust
(fig.24)
container . Clean the separator the cover
using a cloth if it is dirty
assembly (3 and 5) back inside the dust container
(fig.26)
. Then fit the dust container back into its
housing and close the vacuum cleaner cover
(fig.27)
.
IMPORTANT
Each time after use, we
recommend that you turn the HEPA filter
cleaning knob 6 times completely, so that your
vacuum cleaner maintains full suction power.
14
EN
(fig.13)
.
(fig.14)
.
(fig.16)
. Place
(fig.19)
, actuate the
, then remove the
(fig.22)
, tapping it
then empty the dust
(fig.25)
. Put the filter