Use And Operation - Klarstein 10030015 Bedienungsanleitung

Function switch: With "Soup" and "Pulse" for selection.
Tamper: The tamper allows you to accelerate the process of very thick and/or frozen mixtures that cannot be
processed in a regular blender. If food is not circulating the machine may be overloaded or may have a trapped
air bubble. Using the tamper helps to maintain circulation by preventing air pockets from forming. Fristly,turn
off the appliance to make it stop working, and then remove the measuring cup, and through the hole in the lid
insert the tamper and use it to press ingredients into the blades as you make frozen ice creams, nut butters, etc.
Resettable fuse button: Incorporated to protect the motor from overheating. If the motor shuts off while in
use: turn controls to "OFF" and unplug from the wall outlet. Remove the jar from the motor unit and free the
blade of any obstructions. Wait 30-45 minutes for the unit to cool down. Press external resettable fuse button
on the bottom of the motor unit.
• Function switch is interlock with Speed dial, when operate Function switch, Speed dial is invalid and when
operate Speed dial, Function switch is invalid.
• Turn off the appliance to make it stop working when the tamper is used during blending.
• You may need to move the tamper not only up and down, but also side to side.
Before first Use
• Unpack the appliance and place all parts on a horizontal surface.
• Immerse the jar, jar lid, measuring cup and tamper in warm soapy water and rinse them and dry. Never
immerse motor unit in water for cleaning to prevent the risk of electric shock. CAUTION: The blade is very
sharp, please handle carefully.
• For attaching jar, firstly place the jar lid and measuring cup into the jar, ensure the jar lid and measuring cup
are placed tightly and properly with the jar. And then place the jar onto the jar support pad and fix it onto the
motor unit tightly. Until now, the blender is ready for use.
• Before assembling the jar, be sure the power cord is unplugged from the power outlet, the power switch and
the speed dial are both on the "OFF" positions.
• The appliance will not start to work if the jar is not assembled onto the motor unit properly.
• Make sure all the parts are assembled properly.
Blending
1. Lay the appliance on the flat horizontal surface and make sure it is unplugged.
2. Prepare the carrots and cut them into cubes with a size of 15mm*15mm*15mm. And then remove the measuring
cup and jar lid, after it, put the carrot cubes into the jar. Usually certain amount of purified water has to be added
to facilitate the smooth running of appliance. The proportion of the carrot and water is 2:3. The amount of mixture
should not exceed the max level as indicated on the jar. And then close the jar lid and measuring cup well in position.
3. Connect the appliance with power source, and then push the power switch to "ON" position.
4. Turn the speed dial to the "HI" speed setting and the appliance starts to blend carrots.
5. After blending for about 30 seconds, turn the speed dial to "OFF" position, and the appliance stops working.
6. You may add ingredients into the jar through the center opening of jar cover during operation, firstly, turn
off the appliance to make it stop working, and then remove the measuring cup and add the ingredients into
the jar through the center opening of jar, after it, replace the measuring cup in position. Finally, turn on the
appliance again.

Use and Operation

10