Klarstein 10030015 Bedienungsanleitung Seite 11

Important Hints on Blending
• During operation, if the mixture is too thick to be blended, operate by referring to the description of "Tam-
per" mentioned above.
• You' d better not remove the jar from the motor unit during working process. If it is necessary to remove the
jar, please firstly turn off the appliance to make it stop working and then remove it.
• The max operation time per time shall not exceed 3 minutes and minimum 10 minutes rest time must be main-
tained between two consecutive cycles. And the appliance must rest for at least 30 minutes every 10 cycles.
• After finish blending, move the jar out of the jar support pad, and then carefully take down the measuring
cup and jar lid, then pour and serve. The speed dial and power switch must be at "OFF" positions and the
power outlet must be unplugged before removing the jar.
Crushing Ice
1. Lay the appliance on the flat horizontal surface and make sure it is unplugged.
2. Prepare some ice and cut them into cubes with a size of 15mm*15mm*15mm. And then remove the measuring
cup and jar lid, after it, put the ice cubes into the jar. Usually certain amount of purified water has to be added
to facilitate the smooth running of appliance. The proportion of the ice and water is 2:3. The amount of mixture
should not exceed the max level as indicated on the jar. And then close the jar lid and measuring cup well in
position. Connect the appliance with power source, and then push the power switch to "ON" position.
3. Turn the speed dial to the "HI" speed setting or push the function switch to "Pulse" setting and the appliance
starts to crush ice.
4. After crushing ice for 3 minutes, turn the speed dial to "OFF" position, and the appliance stops working.
5. You may add ingredients into the jar through the center opening of jar cover during operation, firstly, turn
off the appliance to make it stop working, and then remove the measuring cup and add the ingredients into
the jar through the center opening of jar, after it, replace the measuring cup in position. Finally, turn on the
appliance again.
Important Hints on Crushing Ice
• During operation, if the mixture is too thick to be crushed, operate by referring to the description of "Tam-
per" mentioned above. You' d better not remove the jar from the motor unit during working process. If it is
necessary to remove the jar, please firstly turn off the appliance to make it stop working and then remove it.
• The max operation time per time shall not exceed 3 minutes and minimum 10 minutes rest time must be
maintained between two consecutive cycles. And the appliance must rest for at least 30 minutes every
10 cycles. After finish working, move the jar out of the jar support pad, and then carefully take down the
measuring cup and jar lid, then pour and serve. The speed dial and power switch must be at "OFF" positions
and the power outlet must be unplugged before removing the jar.
Grinding
1. Lay the appliance on the flat horizontal surface and make sure it is unplugged.
2. Prepare 200g roasted coffee beans, and then remove the measuring cup and jar lid and put the roasted
coffee beans into the jar, after it, close the jar lid and measuring cup well in position. The maximum capacity
of food to be grinded must not exceed 200g.
3. Connect the appliance with power source, and then push the power switch to "ON" position.
4. Push the function switch to "Pulse" setting and the appliance starts to grind coffee beans.
5. After grinding for about 30 seconds, turn the speed dial to "OFF" position, and the appliance stops working.
11