Axis P3364–VE Installationsanleitung Seite 21

Install the Camera Unit
NO NO TICE NO TICE TICE
Risk of heater malfunctioning. Make sure the switch under the camera is configured to
HEATER-PoE CLASS 3.
Note
Be careful to not stretch the network cable, or bend it unnecessarily, as this can break
the cable.
1. Attach the network cable to the camera unit and, if required, the cables for audio and
I/O. It is recommended that the network cable is turned into a loop as shown in the
illustration.
2. Insert the SD memory card (optional).
3. Pull aside the springs in the unit casing and click the camera unit in place.
4. Attach the fan connector to the connector in the camera unit.
1
Fan connector
2
Camera unit
3
Spring
4
Network cable
Adjust the Position of the Lens
The lens can be rotated and tilted to cover a certain area of interest and adjust the live view image.
AXIS P33–VE Network Camera Series
21