Controls; How To Use - Vornado NGT335 Bedienungsanleitung

CONTROLS

VERSA-FLOW™
ADJUSTMENT DIAL
SPEED/TIMER
INDICATOR LIGHTS
POWER ON/OFF
10 English

HOW TO USE

Before use, check appliance for visible damage. DO NOT USE THIS TOWER if there is evidence of damage. If any damage is found, refer to
back page for your Authorized Service Center.
1. Touch
2. Select desired speed by pressing
-/+. Speed is indicated by number of
lights illuminated:
TIMER BUTTON
Low/Medium speed
Medium/High speed
Note: The display will dim after 3 seconds
SPEED/TIMER
of inactivity.
ADJUSTMENT
BUTTON (-/+)
3. Rotate Versa-Flow Adjustment Knob in
either direction to adjust angle of airflow.
4. Press
Indicator Lights will turn orange to
indicate timer adjustment mode. While
in this mode, select amount of time in
one-hour intervals by pressing
After a few seconds, the flashing orange
to power on.
Low speed ••
••••
Medium speed ••••••
•••••••
High speed ••••••••
to activate timer. The and
OR -/+.
Indicator Lights will turn white, indicating
you have left timer adjustment mode.
Note: The display will dim after 3 seconds
of inactivity.
The will continue to glow orange to
indicate the timer is set. Touch the
to quickly tell you how many hours are
remaining on the timer.
5. To adjust timer, press
until Indicator
Lights flash orange. Then press OR -/+
to select new timer setting.
6. To cancel timer, press and hold for
4 seconds or press until all eight
Indicator Lights are illuminated, then
press once more. All the lights will
illuminate white, indicating the timer
is off.
English
11