Cleaning And Maintenance - SOLIS 7214 Bedienungsanleitung

C LEAN IN G A N D M AI NT E NANCE
▲ ▲
1 . C L EA N I N G CA SI N G A N D W A T ER T ANK
• Always switch off the appliance and pull the power plug before cleaning.
• Let appliance cool down completely.
• Regularly clean the water tank using clean water (at least once a week). Should
there be lime deposits in the water tank, add decalcifier suitable for air humidi-
fiers to the rinse water (f.e. SOLIPOL
• Clean the outer side of the appliance with a soft, damp cloth and a little of mild
washing-up liquid (when needed). Never dip the appliance in water and do not
spray it with water or other liquids.
CAUTION: Never use aggressive or corrosive cleaning agents or a rough sponge.
•
The plastic casing might be damaged.
2 . CL E A N I N G N EBU L ISA TI O N , H E AT ING UNIT ,
N E B UL I SA TI O N CHA MBE R A N D F EL T MAT
CAUTION: Always let the appliance cool down
completely before cleaning nebulisation, heating unit
and nebulisation chamber.
• Empty out the appliance.
• Remove mist duct and mist pipe as follows:
• Remove the mist pipe by turning it counter-
clockwise (fig.11).
• Grab the upper end of the mist duct and pull it off
in an upwards motion (fig.12+13).
• Clean the nebulisation chamber and heating unit
with a soft brush and rinse with water. Then, dry
both off with a cloth.
• The white felt mat lying on the heating unit
can be cleaned with clear water and some mild
detergent.
68
® forte). Follow the directions on the bottle.
nebulisation chamber
fig.11
fig.12
fig.13
heating unit