Straightening Hair - Silvercrest IAN 275621 Bedienungsanleitung

Straightening hair

1) Prepare the hair as described in "Before straightening".
2) Start with the lower sections of hair at the back of your head. Work around
the sides to the front. Take a strand with a width of approximately 2 cm and
hold its end tightly between your index and middle fi nger of the hand that is
not holding the hair straightener.
Ensure that the hotplates 5 do not touch your scalp. Risk of burns! During
►
operation, touch the appliance only on the handles. Risk of burns!
3) Clamp the strand near the root between the hotplates 5 and press them
together.
4) Pull the entire strand through the hotplates 5 by pulling the hair straightener
quickly downwards from the root to the tips.
5) Proceed in the same way for every strand.
6) Once you have straightened all the strands, switch the appliance off and pull
the power plug from the mains power socket.
7) Allow the appliance to cool down completely.
8) Press the hotplates 5 together and push the catch 3 back in.
SHG 32 B1
WARNING! RISK OF INJURY!
│
GB 27 ■