Declaration Of Conformity; Warranty - Modster PAUL Betriebsanleitung

Manual

13. Declaration of Conformity

Hereby Modellport Schweighofer declares that the model corresponds to the relevant directives and standards of the Radio Equipment Direc-
tive 2014/53/EU and that the series is manufactured correspondingly.
For conformity please contact
Modellsport Schweighofer
Wirtschaftspark 9
AT-8530 Deutschlandsberg
http://www.der-schweighofer.com
info@der-schweighofer.com
Disclaimer
Neither compliance with the operating instructions in connection with the model, nor the operation and methods for operation, use and
maintenance can be monitored by us. Therefore, we can not accept any liability for losses, damages or costs resulting from misuse or in any
way connected with it.

14. Warranty

The statutory warranty covers manufacturing and material defects in normal use. We do not accept liability for consequential damages!
The guarantee / warranty does not include:
- Damage caused by failure to observe the safety instructions or the operating instructions
- force majeure, boggling, incorrect handling
- Overuse or foreign influence
- unauthorized changes
- Damage caused by loss of control
- Influence of current, high voltage or lightning strike
- Normal wear and tear
- visual defects
- transport, shipping or insurance costs
Tips for Beginners
- Use a training rack at first (saves many spare parts)
- Use high quality tools (such as WiHa screwdrivers) for adjustments or repairs. With cheap tools one has no fun and only turns the screws out
or you do not get the screws at all.
Care and Maintenance
• Although the model is a highly complex system, maintenance is limited to just a few points.
• After every flight, check the aircraft for visible damage and replace any defective parts immediately. This is especially true for rotating
parts.
• To minimize the wear of moving parts, they must be regularly cleaned and lubricated.
• Although the bearings are relatively insensitive to soiling, they must nevertheless be regularly checked and, if necessary, cleaned or
replaced.
• Silicone-free silicone oil is recommended for gears and open-running bearings, as is also used for the lubrication of open-running chains.
This will dry out after a few minutes, so no dirt or dust can stick to the freshly lubricated components.
• Before disassembling parts, it is advisable to take one or more photos (also from other viewpoints). This allows you to focus on any pro-
blems that may occur.
This instruction manual corresponds to the technical state at the time of printing.
Subject to change without prior notice.
www.modster.at
MODSTER PAUL Pocket Drone
25