Styling Nozzle - Bosch PHD2511B Gebrauchsanweisung

10 10
C ongratulations on purchasing this
Bosch appliance.
You have acquired a high-quality
product that will bring you a lot of
enjoyment.
Controls and accessories
1 Temperature toggle switch
– Setting 1 = low
– Setting 2 = medium
– Setting 3 = high
2 Fan toggle switch
– Setting 0 = off
– Setting 1 = gentle
– Setting 2 = strong
3 Lockable Cool button
4 Air inlet grill
5 Styling nozzle
6 Hanging eyelet
Use
The blow and temperature settings can be
freely combined.
General
● Never cover the blower or air inlet.
● Make sure the air inlet is free of lint and
hair.
● The hairdryer will switch off automatically
if it overheats due to the air inlet being
covered. It will switch back on automatically
after a few minutes.
Important: Be sure to unplug the appliance
and wait a few minutes until it has cooled
down. It can then be used as before.
● To pre-dry wet hair, select the higher set-
ting 2. Hold the appliance about 10 cm
away from your head.
Robert Bosch Hausgeräte GmbH
111124_PHD2511B_p.indd 10
k
l
3
Cool button
3
The Cool function is ideal for ‚setting' the
hair after drying. It i xes the individual hair
sections with the cool airfl ow.
Press the Cool button
c ooling function in any setting.
Press the Cool button
the cooling function.
Styling nozzle
The styling nozzle 5 is specially designed
for drying and styling sections of hair.
Attach the styling nozzle 5 to
the appliance. Make sure it
clicks into place. The nozzle
can be turned as required.
Use
● Set the fan and temperature to a higher
setting.
● Direct the air stream right onto the section
of hair you want to style.
● To i x the hair, switch on the Cool
b utton and repeat the process.
3
Important: The nozzle should never actually
touch the hair.
Warning! The styling nozzle 5 can become
hot. Allow it to cool down before detaching.
For more information on Bosch styling, visit
www.bosch-personalstyle.com
en
to activate the
3
again to switch off
3
28.11.2011 12:08:02