Using The Appliance; Styling Nozzle - Bosch PHD1151 Gebrauchsanleitung

en
A Risk of fatal injury!
Never allow the appliance to come into contact with water.
Even an appliance that has been switched off poses a danger;
therefore unplug the appliance after every use or when
interrupted in its use.
Installing a ground fault circuit interrupter up to 30 mA in the house
offers additional protection. Please consult an electrician.
A Risk of suffocation!
Do not allow children to play with packaging material.
A Risk of burns!
The styling nozzle can become hot. Allow it to cool down before
detaching.
Congratulations on purchasing this
Bosch appliance. You have acquired a
high-quality product that will bring you a
lot of enjoyment.
These operating instructions describe a hair
dryer and accessories.

Using the appliance

Important:
■ Never cover the fan or air inlet.
■ Ensure that the inlet opening does not
become blocked with lint or hair.
■ If the hair dryer overheats, e.g. due to
a covered air inlet, it will automatically
switch off and then switch on again
several minutes later.
Use a coin or something similar to set the
appliance to the correct mains voltage. If
you select the wrong voltage, the appliance
will either overheat and switch off or the
power will fall off.
EU USA
230 V~ 110 V~
6
Fan/Temperature
off gentle/low
To predry towel-dry hair, select the powerful
fan setting and a high temperature. Keep
the fan opening approx. 10 cm from your
head.

Styling nozzle

The styling nozzle is specially
designed for drying and styling
sections of hair. Attach the
styling nozzle to the appliance.
Make sure it clicks into place. The nozzle
can be turned as required. Select gentle fan
with a low temperature.
Important: The nozzle should never
a ctually touch the hair.
For more information on Bosch styling visit
www.bosch-personalstyle.com
strong/high