Airdesign PURE 2 Betriebshandbuch Seite 47

3. Lay the leading edge flat on the packing bag / AirPack and secure with the internal strap just
below the end of the polyamide rods.
4. Adjust the packed leading edge to ensure all polyamide rods are flat against each other.
5. Fold the rest of the wing in from the tips using the same concertina style.
6. Fold the wing up from the trailing edge into 2 or 3 folds, removing excess air and making
sure that the packed leading edge is kept flat and outermost. DO NOT fold the leading edge
back inside the wing. This may damage/distort the polyamide rods.
The PURE2 has got polyamide rods at the front at the A´s and at the B´s. In between these rods
is a gap. When the glider is folded chord wise the wing should be folded at this gap. The PURE2
must not be folded at the rods to ensure maximum performance and flying characteristics.
46