Changing The Remote Control Batteries; Cleaning And Maintenance - Waeco PerfectView REC400 Montage- Und Bedienungsanleitung

PerfectView REC 400
9.6 Resetting the SD card
You can reset the SD card in order to use it for other storage media.
➤ Connect the SD card to a PC using a card reader.
➤ Open the main menu of the software application "Car DVR".
➤ Click the
button.
➤ Select a memory card or a local data storage medium for the reset.
➤ Select the sub-item "Restore".
➤ Confirm by pressing "Yes".
➤ Click "Start" and "OK" to start the process.
➤ End the application using "OK" and "Close".
✓ The SD card can be used for other storage media.
10

Changing the remote control batteries

➤ Pull the cover off the lower end of the remote control.
➤ Replace the battery (3 V coin cell).
➤ Push the cover back in place.
11

Cleaning and maintenance

NOTICE!
A
Do not use sharp or hard objects or cleaning agents for cleaning as
these may damage the product.
➤ Occasionally clean the product with a damp cloth.
EN
Changing the remote control batteries
45