Waeco PerfectView REC400 Montage- Und Bedienungsanleitung Seite 36

Setting the video recorder
Setting the display mode
Once you have started up the device, you can select whether you wish to
view all four camera images or the images from the first camera input (CAM1)
live by using the menu item "Live Screen Mode Setting". The preferred set-
ting is saved as the standard setting.
➤ Select the required sub-item (see chapter "Navigating through menus" on
page 35).
➤ Use
or to choose between multi-channels (all four cameras) or
channel 1 (camera 1).
➤ Press
to confirm.
✓ The screen will switch to the live screen mode.
Setting recording properties
You can make the following settings under the menu item "Record Setup":
 Recording resolution: D1 (720 x 576 pixels) / CIF (352 x 288 pixels)
 Recording speed: 5 / 15 / 20 / 25 / 30 frames per second (D1 max.15 / CIF
max. 30)
 Recording quality: low/normal/high
➤ Select the required sub-item (see chapter "Navigating through menus" on
page 35).
➤ Use
or to select the parameters.
➤ Confirm by pressing
✓ The screen will switch to the live scree mode.
Setting the colour
You can make the following settings for each camera channel under the
menu item "Color Adjustment":
 Brightness
 Contrast
 Hue
➤ Select the required sub-item (see chapter "Navigating through menus" on
page 35).
➤ Use
or to select the parameters.
36
.
PerfectView REC 400
EN