Safety Instructions; General Safety - Waeco PerfectView REC400 Montage- Und Bedienungsanleitung

PerfectView REC 400
NOTICE!
A
Failure to observe this instruction can cause material damage and
impair the function of the product.
NOTE
I
Supplementary information for operating the product.
➤ Action: This symbol indicates that action is required on your part. The
required action is described step-by-step.
✓ This symbol describes the result of an action.
fig. 1 5, page 3: This refers to an element in an illustration. In this case,
item 5 in figure 1 on page 3.
2

Safety instructions

The manufacturer accepts no liability for damage in the following cases:
 Faulty assembly or connection
 Damage to the product resulting from mechanical influences and excess
voltage
 Alterations to the product without express permission from the manu-
facturer
 Use for purposes other than those described in the operating manual
2.1

General safety

WARNING!
!
Inadequate supply cable connections could result in short circuits,
causing:
 Cable fires
 The airbag being triggered
 Damage to electronic control equipment
 Electrical malfunctions (indicators, brake light, horn, ignition,
lights)
 This appliance may only be repaired by qualified personnel. In-
adequate repairs may cause serious hazards.
EN
Safety instructions
27