Operating The Video Recorder - Waeco PerfectView REC400 Montage- Und Bedienungsanleitung

Operating the video recorder

Menu item
Car information
Audio recording
Password
Speed unit
Time zone
9 Operating the video recorder
9.1 Making video recordings
NOTE
I
 To start operating the video recorder, an SD card with at least
4 GB of memory capacity must be inserted first.
 The video recorder switches on automatically as soon as volt-
age is supplied. It is not possible to switch it on and off manually.
Starting recordings
➤ Insert the SD card into the slot in the video recorder (fig. 3 5, page 4).
➤ Switch on the ignition.
After approximately 30 seconds, the starting process is complete. The red
LED lamp begins to flash during the starting process and the video recorder
starts recording.
NOTE
I
If you switch on playback mode, the video recorder will stop record-
ing.
40
Function
Enter the name of the driver or the driver's licence
number.
Switch the audio recording on or off.
Protect the data by entering a password with a maxi-
mum of 15 digits. You can enter up to 2 user names
and passwords.
After setting the password function, you must enter
the password to play back videos or to make other
settings.
Select the unit for measuring speed:
km/h, miles/h, knots.
Select the time zone.
PerfectView REC 400
EN