Correct Use; Residual Risks; Safety Instructions - Collomix Collomatic TMS 2000 Originalbetriebsanleitung

By purchasing this mixer, you have acquired a high-quality, perfected
and efficient machine.
Keep these instructions in a safe place for later reference.
Be sure that you have carefully read and fully
understood these instructions before you start
the machine, and adhere to all of them.
Contents
Meaning of the symbols
EC Declaration of Conformity
Symbols in the operating manual

Correct use

Residual risks

Operating times

Safety instructions

Start-up / switching on and off
Mixing
Transport
Storage
Cleaning
Maintenance
Repair
Malfunctions
Technical data
Ciricuit diagram
Spare parts
Guarantee
Symbols in the operating manual
Potential hazard or hazardous situation. Failure to
observe this instruction may lead to injuries or cause
damage to property.
Important information on proper handling. Failure to
observe this instruction may lead to faults.
User information. This information helps you to use all the
functions optimally.
Assembly, operation and servicing. Here you are
explained exactly what to do.
Correct use
• The mixer can be used for both home and professional
applications for mixing mortar, bonding agents, plaster, pointing
material, filler, lime, plastic and granular material, epoxy resins,
refractory materials.
• Proper use includes adherence to the operating, maintenance and
repair instructions of the manufacturer and observance of the
safety instructions they contain.
• Any other utilisation counts as improper use, especially mixing
combustible or explosive materials (
and use with foodstuffs. The manufacturer is not liable for
damages resulting from improper use:
bear the risk.
• Unauthorised modifications on the device exclude a liability of the
manufacturer for damages of any kind resulting from it.
• Only persons who are familiarised with the device and informed
about possible risks are allowed to prepare, operate and service
this device. Repair works may only be carried out by us or by a
customer service agent nominated by us.
7
1
3
7
7
7
7
7
8
8
8
8
9
9
9
9
30
31
31
34
fire and explosion hazard)
the user alone shall
Residual risks
Even if used properly, residual risks can exist even if the relevant
safety regulations are complied with due to the design determined by
the intended purpose.
Residual risks can be minimised if the "Safety information" and the
"Intended usage" as well as the whole of the operating instructions are
observed.
Observing these instructions, and taking proper care, will reduce the
risk of personal injury or damage to the equipment.
• Danger resulting from electric current, if improper connecting leads
are used.
• Touching live parts when electric components are open.
In addition, in spite of all the precautionary measures taken, non-
obvious residual risks can still exist.
O p e r a t i n g t i m e s
O p e r a t i n g t i m e s
Please observe as well the regional regulations for noise protection.
Safety instructions
Take note of the following instructions to protect
yourself and others from hazards and injuries.
• Observe local accident prevention and safety regulations in the
work area.
•
Do not touch, inhale (dust formation) or swallow cement or
additional materials. Wear personal protective clothing (gloves,
protective glasses, dust mask) when filling or emptying the mixing
drum.
• Set up and run the mixer on a solid, level base
(where it will not tip over).
• Make sure that there is no danger of tripping
near the mixer.
• Be sure that there is enough light.
• The operator is responsible for third parties in the work place.
• Keep children away from mixer.
• Persons younger than 16 years of age are not allowed to operate
the mixer.
• Only use the mixer for the functions listed in "Correct use".
• Do not alter the machine or any of its parts.
• Replace defective or damaged parts on the machine immediately.
• Only start up the mixer if the protective devices are complete and
undamaged.
• Fill or empty the mixing drum only when the motor is running.
• Do not alter the revolution speed of the motor, since this controls
the safe maximum operating speed, and protects the motor and all
rotating parts against damage due to excess speed.
• Be absolutely sure to pull the plug before:
− moving or transport
− cleaning, maintenance or repair work
− eliminating faults
− checking connecting lines, whether these are knotted or
damaged
− leaving unattended (even during short interruptions)
•
Check the machine for possible damage:
− Before further use of the machine the safety devices must be
checked carefully for their proper and intended function.
− Check whether movable parts function perfectly and do not
stick or whether parts are damaged. All parts must be correctly
installed and fulfil all conditions to ensure perfect operation of
the machine.