Commissioning
Configuring the COM Port
Start the ServiceTool.
1.
Click the Communications tab.
2.
1.
3.
5.
In the Comport setting list, select the COM port which was
3.
configured on the PC for the USB/RS-232 adapter (see the
PC's Device Manager).
Under Baud rate, select COMfortel WS-R2/R4 (9600
4.
baud).
Click Set Comport.
5.
The repeater connects to the PC. You now see Re-
peater connected in the status line.
Setting Up as Multicell System
Note: To operate the repeater, IP DECT encryption must be disa-
bled.
24
2.
4.
COMfortel WS-R2/WS-R4 - Instructions V05 08/2017