General Directions For Use - Zibro SRE CO 304 Gebrauchsanweisung

p50_61_uk_SRE_CO_30x.indd 52

GeneRal diReCtions foR use

Below you will find the main steps to be taken for
using your heater. For more details, please refer to
Section A.
1
Remove all packaging materials (refer to Section A).
2
Fill the removable tank (refer to Section B).
3
Insert the plug into the wall-socket.
4
Ignite the heater using the
5
If required, change the temperature using the adjustment
buttons (refer to Section F).
6
Switch off the heater by pressing the
H).
• As a fire precaution, the tank must be filled either
when the heater has been switched off or in
another room than the room where the heater is
installed.
• Always ensure that the tank is closed properly
after filling it at a safe distance from all sources of
heat and open flames (see chapter B).
• The first time the heater is ignited it will smell like
"new" for a short time.
• Store all fuel containers with their original caps
and seals in a cool and dark place.
• Fuel ages. Use new fuel at the start of every
heating season.
• The use of Qlima Premium Quality Fuels as a
heating fuel assures you that you have a good
quality fuel.
• Before changing brands and/or types of fuel
make sure that the mobile heater first completely
empties all of the remaining fuel inside the
heater.
• Prevent all contact with the grill, since it can
become very hot.
key (refer to Section D).
key. (refer to Section
4
52
22-04-14 09:04