Bosch GHO 40-82 C PROFESSIONAL Bedienungsanleitung Seite 12

Tool Specifications
Planer
Order number
Rated input power* [W]
Output power
No-load speed
Planing depth
Rebating depth
Planing width, max. [mm]
Weight without
cable, approx.
Protection class
Please observe the order number of your machine.
The trade names of the individual machines may vary.
* The values given are valid for nominal voltages [U] of
230/240 V. For lower voltages and models for specific
countries, these values can vary.
Noise/Vibration Information
Measured values determined according to
EN 50 144.
Typically the A-weighted noise levels of the ma-
chine are: Sound pressure level: 85 dB (A);
sound power level: 98 dB (A).
Wear hearing protection!
The typical hand/arm vibration is below 2.5 m/s
Intended Use
The machine is intended for planing of firmly sup-
ported wooden materials, such as beams and
boards. It is also suitable for beveling edges and
rebating.
For stationary use, the machine can be built into
the base unit UG 37 or the surface and panel
planer attachment ADV 82.
12 • 2 609 932 232 • TMS • 23.03.04
GHO 40-82 C
PROFESSIONAL
0 601 59A ...
850
[W] 450
[rpm] 14 000
[mm] 0 – 4.0
[mm] 0 – 24.0
82
[kg] 3.2
/ II
Machine Elements
The numbering of the machine elements refers to
the illustration of the machine on the graphics
page.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
1 Fastening bolt for rebating depth stop *
2 Rebating depth stop*
3 Chip ejector (alternatively right/left)
4 Storage compartment for
planer blade/Allen key
5 Depth adjustment knob
6 Planing depth scale
7 Chip ejection selector lever
8 Lock-off button
9 On/Off switch
10 Soft grip
11 Belt cover
12 Screw for belt cover
13 Planer base plate
14 V-grooves
15 Parallel guide*
16 Fastening bolt for parallel and beveling guide
2
.
17 Locking nut for adjustment of rebating width
18 Scale for rebating width
19 Beveling guide*
20 Locking nut for angle adjustment
21 Vacuum hose Ø 35 mm*
22 Chip/dust bag*
23 Park rest
24 Service station*
25 Blade drum
26 Clamping element
27 Fastening screws for planer blade
28 Carbide blade (TC)
29 Lateral blade-shaft protector
30 Allen key
31 Drive belt
32 Large pulley
33 Small pulley
* Not all of the accessories illustrated or described are
included as standard delivery.
English - 1