Cleaning Before Use; Electrical Connections - Viessmann NORWELL Bedienungsanleitung

PI
3. Ensure that the airflow to the condenser unit is not obstructed.
Leave an unobstructed air gap of at least 20 cm behind the cabinet.
When installing the cabinet, make sure of the following:
• The area where the cabinet is placed is flat and level.
• No objects are placed on top of the cabinet.
• The cabinet is not placed in the immediate vicinity of a heat source such as a radiator,
air blown heater or spotlight. See figure A.
• The cabinet is not exposed to direct sunlight. If necessary, use blinds in any nearby
window. See figure B.
• The air conditioning for the premises does not blow onto the cabinet. See figure C.
The correct positioning of the cabinet optimises temperature conditions and performance.
Cabinets with castors / wheels may be anchored to the wall behind them as a safety
precaution.

2.7. Cleaning before use

1. Clean the cabinet surfaces and the storage compartment for foodstuffs with a mild liquid
detergent (pH 6-8) before using the cabinet.
Follow the instructions provided with the detergent.
NOTE
2. Dry the surfaces carefully.

3. Electrical connections

NOTE
The symbol marked on the cabinet (a lightning bolt inside a triangle) indicates that
there are components and wires under the cover containing live voltage. Only
personnel qualified to install and service electrical equipment are permitted access
to areas that contain live voltage.
Version 1/2013
Make sure that all cleaning fluids are classed as non-toxic.
ENGLISH
5