Cleaning Before Use - Viessmann TECTOPROMO MD1 EUROCLASSIC Bedienungsanleitung

PI
2. Set the cabinet in its place.
Leave an unobstructed air gap of at least 8 cm behind the
cabinet, also when cabinets are back to back, and of at least
25 cm above the cabinet.
3. Adjust the cabinet to stand perpendicularly using the adjustable legs.
4. Ensure that the airflow to the condenser unit is not obstructed.
When installing the cabinet, make sure of the following:
The correct positioning of the cabinet optimises temperature conditions and
performance.
Cabinets with castors / wheels may be anchored to the wall behind them as
a safety precaution.

2.6. Cleaning before use

1. Clean the cabinet surfaces and the storage compartment for foodstuffs with a mild liquid
detergent (pH 6-8) before using the cabinet.
Follow the instructions provided with the detergent.
NOTE
2. Dry the surfaces carefully.
Original instructions
Downloaded from www.Manualslib.com
• The area where the cabinet is placed is flat and level.
• No objects are placed on top of the cabinet.
• The cabinet is not placed in the immediate vicinity of a heat source
such as a radiator, warm air blowing heater or spotlight.
• The cabinet is not exposed to direct sunlight. If necessary, use blinds in
any nearby window.
• The air conditioning for the premises does not blow onto the cabinet.
Make sure that all cleaning fluids are classed as non-toxic.
manuals search engine
ENGLISH
5