PI
4.4.2. Checking temperature settings
1. Press the FNC key briefly.
The text SEtt appears in the display.
2. Press the OK key.
The setpoint value appears in the display.
3. Press the FNC key again to return to normal status.
The normal temperature view also reappears if you do not touch any button for five (5)
minutes.
4.5. Dixell XR40CX control device
NOTE
The type of the control device depends on the cabinet.
XR40CX is a cabinet controller that automates cabinet defrosting by means of a thermostat and
temperature sensor.
4.5.1. Display messages
In normal status, the display shows cabinet temperature.
Defrosting signals
Defrosting under way.
Probe failure alarm signals
Thermostat probe failure. Contact
service.
Cabinet temperature probe failure.
Contact service.
Version 1/2013
Evaporator probe failure.
Contact service.
ENGLISH
Safety switch probe failure.
Contact service.
8