Technical Specifications - Omnitronic Control 1 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für Control 1:

Bedienungsanleitung (16 Seiten)

Inhalt

Seite von 25

/ 25
Inhalt
Inhaltsverzeichnis
Lesezeichen

Inhaltsverzeichnis

Verfügbare Sprachen

The following points have to be considered during the inspection:

1) All screws used for installing the speaker-systems or parts of the speaker-system have to be tighly

connected and must not be corroded.

2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,

trussing).

3) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or

sediments. Further instructions depending on the installation spot and usage have to be adhered by a

skilled installer and any safety problems have to be removed.

We recommend a frequent cleaning of the speaker-system. Please use a soft lint-free and moistened cloth.

Never use alcohol or solvents!

There are no servicable parts inside the speaker-system. Maintenance and service operations are only to be

carried out by authorized dealers.

If the speaker-system distorts, one of the loudspeakers may be defective. Test the speaker-system once

more with another amplifier. If the sound remains distortet, the speaker-systeem should not be operated any

more in order to prevent further damage. Please contact your dealer.

If clacking sounds are heard from the speaker-system, screws may have loosended due to the continuous

vibrations. The speaker-system should be checked by a specialist. Especially for public use, the speaker-

system should be checked before every operation so that the speaker-system and the speakers in the

systems are always well fixed.

Should you need any spare parts, please use genuine parts.

Should you have further questions, please contact your dealer.