Technical Specifications - Omnitronic OD-22T Bedienungsanleitung

If the speaker system distorts, one of the loudspeakers may be defective. Test the speaker system once
more with another amplifier. If the sound remains distorted, the speaker system should not be operated any
more in order to prevent further damage. Please contact your dealer.
If clacking sounds are heard from the speaker system, screws may have loosened due to the continuous
vibrations. The speaker system should be checked by a specialist. Especially for public use, the speaker
system should be checked before every operation so that the speaker system and the speakers in the
systems are always well fixed.
Should you need any spare parts, please use genuine parts. Should you have further questions, please
contact your dealer.
..............................................................................................................................................................................

TECHNICAL SPECIFICATIONS

Inpult voltage:
Rated power:
Program power:
Speaker:
Connection:
Sensitivity:
Max. SPL:
Frequency range:
Dispersion angle (HxV):
Dimensions (L x W x H):
Weight (piece):
OD-2T
100 V
15 W RMS
30 W
6 cm (2.5")
spring clamps
88 dB (1 W, 1 m)
92 dB (1 m)
150 Hz - 22 kHz
60° x 60°
111 x 87 x 90 mm
0.5 kg (incl. mounting plate)
11
OD-22T
100 V
15 W RMS
30 W
2 x 6 cm (2 x 2.5")
spring clamps
88 dB (1 W, 1 m)
92 dB (1 m)
120 Hz - 22 kHz
60° x 60°
110 x 209 x 109 mm
0.9 kg (incl. mounting plate)