Omnitronic MPZ SERIES Bedienungsanleitung Seite 23

12
Control PRIORITY LEVEL
Adjusts the attenuation level when releasing the chime
and in case of microphone
microphone channel 3.
13 Inputs MIC 2 and MIC 3
Unbalanced 6.3 mm jacks for connecting microphones.
14 Inputs LINE 1 to 3
Stereo RCA inputs for connecting units with line level
(e.g. CD player).
15 Output LINE
Stereo RCA output for connection to units with line
level inputs (e.g. mixer, amplifier).
16 Speaker zone outputs
Terminals for zones 1 to 6 for connecting 100 V
speakers.
CAUTION! The total load of all zones must not exceed
180 W (MPZ-180.6), 250 W
RMS
350 W (MPZ-350.6) or 500 W
RMS
announcements via
(MPZ-250.6),
RMS
(MPZ-500.6).
RMS
23/28
17 Mains cable
For connection to a mains socket.
18 Clamping screw
For a potential ground connection.
19 Direct speaker output
• Direct output for 70 V or 100 V speakers or 4 to 16
speakers and commond ground connection COM.
• The zone buttons do not affect these outputs.
CAUTION! Never use the direct outputs and the zone
outputs at the same time, otherwise the amplifier will be
overloaded.
20 Mains fuse
Only replace the fuse when the unit is disconnected from
the mains. Only use a fuse of the same rating and power.
The correct fuse value is specified on the rear panel.
00056943.DOC, Version 1.0