Zibro Carmen Installations-Handbuch Seite 55

FOREWORD:
This installation manual is intended for use by individuals possessing adequate
backgrounds of electrical, mechanical and combustion engineering.
Note that wrong and/or improper installation of the stove might lead to significant
personal injury and/or damage to properties. Damage caused by wrong/improper
installation and/or not following the advice in this manual are not covered by the
warranty.
The manufacturer nor distributor can be responsible for the interpretation of this
information, nor can it assume any liability in connection with its use.
The information, specification and parameters are subject to change without prior
notice due to technical improvements. The accurate specifications are presented
on the nameplate label.
The stove most be installed by a by Zibro authorized installer. Only in this way the
end-user can be sure that the installer has sufficient background and sufficient
knowledge of the product.
The heater can only function safely when it is connected to a professional installed,
good functioning chimney/flue. The chimney/flue system must always be installed
following local legislation and/or following insurance company prescription and/or
instructions given in this manual. Whatever is the most stringent will prevail.
Even when installed with proper chimney/flue system and/or with direct fresh air
supply to the stove, the stove can never be regarded as a room independent com-
bustion system.
The illustrations in this manual are for explanation and indication purposes only
and may be different from the actual stove you purchased.
4
55