Midland Btcity/Bteva; Bluetooth Connections; Wire Connections - Midland BTCity Handbuch

Midland BTCity/BTEva

Thank you for purchasing the Midland BTCity/BTEva, the wireless
intercom multimedia system for bikers. The Midland BTCity/BTEva
is designed to be fitted directly on to your helmet and to be used for
communications with Bluetooth devices like mobile phones, GPS Sat-
Navs and MP3 players. If desired, it can also be paired with another
Midland BTCity/BTEva unit and used as wireless Rider/Pillion Intercom
system or Rider to Rider in bike-to-bike mode, within a maximum range
of 200 meters. The Midland BTCity/BTEva is also supplied with a wired
connection that can be used to connect an iPod/MP3 player or PMR446
transceiver,which will then enable bike-to-bike communications up to a
maximum range of 5 km.
Midland BTCity/BTEva is available in two versions:
› Single BTCity/BTEva Intercom kit with one unit only
› BTCity/BTEva Intercom TWIN with two units
Depending on the model purchased, the package contains the fol-
lowing parts:
BTCity/BTEva
› 1 BTCity/BTEva communication unit
› 1 audio kit with two stereo speakers, microphone with boom and
wire microphone
› 1 plate with bi-adhesive strip to fix the unit onto the helmet
› 1 clamp to fix the unit onto the helmet
› 1 stereo audio cable to connect an iPod/ or other models of MP3
players
› 1 miniUSB wall-mounting power supply
› Wind Suppressing Foam Microphone Cover, Allen key and Velcro
strip for assembly
BTCity/BTEva TWIN
› 2 BTCity/BTEva communication units
› 2 audio kits with two stereo speakers, microphone with boom and
wire microphone
› 2 plates with bi-adhesive strip to fix the unit onto the helmet
› 2 clamps to fix the unit onto the helmet
2
› 2 stereo audio cables to connect an iPod/ or other models of MP3
players
› 1 miniUSB wall-mounting power supply with double plug
› Wind Suppressing Foam Microphone Cover, Allen key and Velcro
strip for assembly
The units included in the TWIN kit are already paired and can therefo-
re be immediately used in the Intercom mode.
Technical specifications of Midland BTCity/BTEva
General:
› Bluetooth ver. 2.0 stereo (Headset/Handsfree/A2DP protocol)
› AGC system automatically controls the volume in relation to
background noise
› Voice (VOX) or manual communications option
› Manual controls to enable: telephone, intercom and wire con-
nection
› Fully waterproof
› Lithium battery with 8 hours talk time
› Recharge time: app. 4 hours

Bluetooth connections:

› Identical device for Rider to Pillion or Bike-to-Bike Intercom mode,
up to a maximum range of 200 meters
› Bluetooth devices
- Mobile phone with MP3 player Stereo (A2DP protocol), GPS (Gar-
min Zumo and TomTom Rider 1 and 2)
- PMR446 transceivers (with built-in or external Bluetooth con-
nection) for group bike-to-bike communications

Wire connections:

› For stereo audio input (iPod/MP3 player)
› For PMR446 transceivers (with optional cable)
Attention: before using BTCity/BTEva for the first time, remem-
ber to recharge it for at least 5/6 hours.
Attention: Midland BTCity/BTEva is designed to withstand rain
and water. However, if it is raining, always verify that the rub-
ber caps protecting the sockets are fully fitted.