Light And Sound Signal - Midland BTCity Handbuch

LIGHT AND SOUND SIGNALS
LED indication
GENERAL
None
Single Blue flash every 3 seconds
Triple red flash
Single Red flash every 3 seconds
RED and BLUE (together) every 3 seconds
RED and BLUE (together) and one flash of RED light every
3 seconds
Single red flash every 2 seconds
Steady Blue
SETUP
Steady Red
Rapid Red-Blue alternating flash
Steady Blue for two second
Audio signals
Ascending tone (low-high)
Descending tone (high-low)
Enable/Disable the Intercom
1 tone
2 tones
Status
Unit is switched off or full charged when connected to the power supply
Unit being turned on/ Unit in working mode
Unit being turned off
Standby - low battery
Active (Intercom, phone call or Bluetooth connection in progress)
Active but low battery
Unit in charge when connected to the power supply
Unit in charge when connected to the power supply: full battery charge
Setup mode
Pairing mode (searching for devices)
Successful pairing/ Reset paired devices
Status
Unit being turned on
Unit being turned off
1 tone = enabled / 2 tones = disabled
Specific feature turned on
Specific feature turned off
13