Bosch Indego 1300 Originalbetriebsanleitung Seite 31

OBJ_BUCH-1573-005.book Page 31 Tuesday, December 17, 2013 12:59 PM
Set Language
English
Deutsch
Dansk
Svenska
Norsk
Suomi
Select one of the "Language" options and confirm with
"Save".
PIN Code
Please set up PIN Code
Select "Proceed" to enter your personal PIN Code.
PIN Code
Enter new PIN:
_ _ _ _
Back
Select the input position with the left/right cursors, adjust the
digits with the up/down cursors and confirm with "Enter" or
select "Back" to return to the first "PIN Code" screen.
Please make a note of your PIN Code-
PIN CODE
here.
Note: Keep the PIN code secret from third parties.
If you have lost your personal PIN code, you will have to return
the Indego and its docking station to a Bosch Service Center
to be unlocked. Please contact your dealer or Bosch (see "Af-
ter-sales Service and Application Service").
Bosch Power Tools
Save Back
Select the "hh:mm", "dd/mm" and "Format: 12 hr" input posi-
tions with the left/right cursors, adjust the values with the
up/down cursors and confirm with "Save" or select "Back" to
return to the first "PIN code" screen.
Please press Follow Wire to complete
Proceed
Back
Press "Follow Wire" to complete mapping the garden.
(Select "Back" to return to the "Date & Time" screen.)
Note: If the Indicator on the docking station flashes green at
this point the perimeter wire is broken, too long (above
450 m) or too short (below 20 m).
Enter
Machine is about to start. Wire being
The following screen indicates the initial follow of perimeter
wire:
Mapping the garden ...
Back
English | 31
Date & Time
hh:mm
dd/mm
Format: 12 hr
Save
Installation
installation process
Follow
Wire
Installation
Step Back
followed...
Mower Status
F 016 L81 082 | (17.12.13)