Setting The Temperature; Cool-Fresh Compartment; Alarm Functions - Siemens Serie KI39F Gebrauchsanleitung

en
Setting
the temperature
Fig. "
Refrigerator compartment
The temperature can be set from +2 °C
to +8 °C.
Keep pressing temperature setting
button on refrigerator compartment 6,
until the required refrigerator
compartment temperature is set.
The value last selected is saved. The set
temperature is indicated on the
temperature display for the refrigerator
compartment 7.

Cool-fresh compartment

The temperature in the "cool-fresh"
compartment has been set to almost
0 °C at the factory and should not be
changed if at all possible.
If frost forms on the refrigerated food,
the temperature can be increased. (See
chapter "Eliminating minor faults
yourself".)
Freezer compartment
The temperature can be set from –16 °C
to –24 °C.
Keep pressing temperature setting
button freezer compartment 3 until
the required freezer compartment
temperature is set.
The value last selected is saved. The set
temperature is indicated on temperature
display for the freezer compartment 4.
34

Alarm functions

Fig. "
Door opening alarm
If the appliance is left open for longer
than one minute, the door alarm
(continuous sound) switches on. Close
the door or press the Alarm button 1 to
switch the warning signal off again.
Temperature alarm
The temperature warning signal switches
on if the freezer compartment is too
warm and the frozen food is at risk
of thawing.
Alarm button 1 flashes: Frozen food is
■
or was at risk of thawing.
Alarm button 1 is lit: Frozen food is not
■
at risk of thawing.
Note
Do not refreeze thawing or thawed food.
Only ready meals (boiled or fried) may
be refrozen.
No longer store the frozen produce for
the max. storage period.
The alarm may switch on without any risk
to the frozen food:
when the appliance is switched on,
■
when large quantities of fresh food are
■
placed in the appliance,
if the freezer compartment door is
■
open too long.
Switching off the alarm
Fig. "
Press the alarm button 1 to switch off
the warning signal.