4.4
Einstellen der
Knetmaschineklappe
•
Arretierungszapfen (1) herausziehen und
Klapphebel (2) in gewünschte Position
verschieben.
• Um Knetmaschinestopfen zu
verhindern
Grasschnittanfang
(3) empfohlen. Später kann
diese
Aggressivität
werden, es kommt auf Masse
und andere Bediengungen an.
75
Bild - Figure 17
2
3
ist
am
Position
auf
größere
umgesetzt
4.4
Setting the kneading machine
panel
1
•
Pull out the arrest stopper (1) and move the
panel lever (2) into desired position.
• To prevent the filling of the
kneading
position (3) is recommanded
with each start of mowing.
Later on the agressivness of
the kneating machine can be
enlarged according to quality
and other conditions.
machine
the