3.1
Transportstellung waagerecht
hinter dem Traktor
Die Maschine in Arbeitsstellung und auf dem
Boden
•
Durch
Schnurzug
Mechanismussperre (2) ausziehen.
•
Gleichzeitig mit dem Traktor langsam nach
vorne bewegen.
•
Schnur (1) loslassen und Traktorbewegung
anhalten wenn die Mechanismussperre in
Position (3) einrückt.
•
Arretierungshebel (5) in Transportstellung
setzen.
•
Die
Dreipunkthydraulikgestänge
800 mm hochheben.
Die Maschine in Transportstellung waagerecht
hinter dem Traktor
•
Die
Dreipunkthydraulikgestänge herunterlassen.
•
Durch
Schnurzug
Mechanismussperre (2) ausziehen.
•
Gleichzeitig mit
rückwärts bewegen.
•
Schnur (1) loslassen und Traktorbewegung
anhalten wenn die Mechanismussperre in
Position (4) einrückt.
69
Bild - Figure 11
(1)
Maschine
mindestens
Maschine
(1)
dem
Traktor
langsam
3.1
Transport position horizontally
behind the tractor
2
5
3
4
The machine in work position and on the ground
•
Pulling the string (1) you pull out the
die
mechanism blockade (2).
•
At one time move forward slowly with the
tractor.
•
Loosen the string (1) and stop moving
forward when the mechanism blockade get
stucked in the position (3).
•
Put the arrest lever (5) into the transport
position.
•
Lift tthe machine with three point hydraulic
mit
hitch for at least 800mm.
The machine in transport position horizontally
behind the tractor
•
mit
Lower
the
hydraulic hitch on the ground.
•
die
Pulling the string (1) you pull out the
mechanism blockade (2).
•
At one time move backward slowly with the
tractor.
•
Loosen the string (1) and stop moving
forward when the mechanism blockade get
stucked in the position (4).
1
machine
with
three
point