3.3
Seitliche Transportstellung mit
erhobenem Messerbalken
Die Maschine in Arbeitsstellung und auf dem
Boden
•
Messerbalken (1) durch Einschaltung des
Hydrauliksystems aufheben.
•
Die
Dreipunkthydraulikgestänge aufheben.
•
Sperrventil (2) in Stellung geschlossen
setzen.
•
Arretierungshebel (3) in Transportstellung
setzen.
Die Maschine in seitliche Transportstellung mit
erhobenem Messerbalken
•
Sperrventil (2) in Stellung offen setzen.
•
Messerbalken (1) durch Einschaltung des
Hydrauliksystems herunterlassen.
•
Die
Dreipunkthydraulikgestänge herunterlassen.
71
Bild - Figure 13
3
Maschine
Maschine
3.3
Transport position at the side of
the tractor with lifted cutter bar
2
The machine in work position and on the ground
•
Lift the cutting bar (1) by switching on the
hydraulic system.
•
Lift the machine with three point hydraulic
mit
hitch.
•
Set the stop valve (2) into position closed
•
Set the arrest lever (3) into transport
position
The machine in transport position at the side
with lifted cutting bar
•
Set the stop valve (2) into position opened
•
Lower the cutting bar (1) by switching on the
hydraulic system.
•
Lower
the
mit
hydraulic hitch.
1
machine
with
three
point