B2B BPM-1 Bedienungsanleitung Seite 8

• Do not expose the blood pressure monitor to strong
magnetic fields (e.g. transformers). Otherwise this
could cause errors in data transmission or damage
to the blood pressure monitor.
• Only use the blood pressure monitor at an ambient
temperature of + 5 °C to + 40 °C and a humidity of
15 % to 93 %.
• Do not open the blood pressure monitor.
• Protect the device against dirt, direct sunlight,
severe temperature fluctuations, chemicals and
mechanical shocks.
• Do not let the device fall down.
• Only use enclosed or original replacement cuffs to
ensure that the measurements are correct.
• Do not start the measurement process until the cuff
has been fitted.
• Do not immerse the blood pressure monitor in
water and do not rinse it off under running water.
• Protect the cuff and cuff hose from sharp and pointy
objects.
• Do not kink the cuff hose.
• Do not place any heavy objects on the blood
pressure monitor, the cuff or cuff hose.
14
Checking the product contents
NOTICE!
Risk of damage!
If you are not cautious when opening the packaging
with a sharp knife or other pointy object, you could
damage the blood pressure monitor.
• You should therefore be very careful when
opening it.
1. Take the blood pressure monitor out of the packaging and remove
the packaging material.
2. Take the protective plastic foil off of the display of the
measurement computer.
Check to make sure that the delivery is complete (see fig. A).
3.
4. Check whether the blood pressure monitor or the individual parts
exhibit damages. If this is the case, do not use the blood pressure
monitor. Contact the manufacturer at one of the service
addresses shown on pages 125 and 126.
15