Storage
If you do not use the blood pressure monitor for a prolonged period of
time, please observe the following notes:
•
Take the batteries out of the battery compartment.
•
Store the blood pressure monitor in the enclosed bag
protect it from dust.
•
Do not store the blood pressure monitor near heat sources.
•
Observe the information concerning the storage environment (see
chapter "Technical data").
•
Do not place any heavy objects on the measurement computer,
the cuff or the cuff hose.
to
40
Troubleshooting
If a malfunction occurs, first check the points below before you send
the blood pressure monitor in to be repaired.
If error codes are shown on the display, proceed as follows:
Switch the measurement computer to sleep mode by pushing the SET
button
, the user 1 button
Observe the solutions provided in the following table.
Problem
Causes and solutions
The error code "E1"
The pulse is not being measured correctly.
and the pulse
•
Fit the cuff correctly on your arm.
indicator appear on
•
Repeat the measurement.
the display.
The error code "E2"
You spoke or moved during the measurement.
appears on the
•
Repeat the measurement without
display.
speaking or moving.
The error code "E3"
The cuff is not on your upper arm.
appears on the
•
Fit the cuff correctly on your arm.
display.
•
Repeat the measurement.
The error code "E4"
A measurement error has occurred.
appears on the
•
Repeat the measurement.
display.
or the user 2 button
(see fig. A).
41